Heating and cooling systems have become a necessity in every house. The good part is that there are umpteen options in the market to match your requirements. But, for maximum efficiency and performance, you need to choose the best heating and cooling system. There are various types of HVAC systems available in the market, such as split air conditioners, reverse cycle heating and cooling system, ducted gas heaters, electric heaters, hydronic heating system and lots more. How would you choose the best HAVC system for your home? In this case, you need to consider several factors. Here, you can find some basic factors you need to consider while choosing an HVAC system.
A Complete Guide for Choosing the Best HVAC System:
If you wish to cover the entire home with an HVAC system, you can install multiple air conditioners in your different rooms, and you can add a few room heaters for the winter. But you need to spend a huge amount on buying such multiple units. So, to save on the cost, you can spend on a centralized heating and cooling system. You can connect your rooms through ducts, and you can hire a contractor to install such ducts on your ceiling or floor. Pool sealed joints and leakages in ductwork can increase your power consumption cost. Make sure you must insulate the ducts properly, and you should clean these ducts every month.
Replacing the Old System
By replacing your old heating system with a new one, you can save up to 20% energy cost by installing an energy-efficient heating system. Older furnaces have a 56% energy rating, and you can find some new heating systems which have 98.5% energy ratings. So, you can install such a heating system in your home to save your fuel or power consumption cost.
Choosing the Right Type
There are three types of room heaters available, such as single state air heaters, two-stage air heaters and variable speed air heaters. Single state air heaters can run at high speed and cannot regulate their speed or temperature. On the other part, two-stage air heaters can run at low and high speed. You can save your energy consumption cost by turn the heater at a low speed. If you want to save your cost in the long run, you can choose a variable speed heater. You can maintain the optimal temperature of your rooms by installing this heater. It has a different mode, and you can change its mode to save your energy consumption cost.
Keeps the Air Purified
Air conditioners are good at keeping your rooms cool, but many new models come with an air purification feature, which keeps the air in the room fresh and free from any pollutants. You need to choose a cooling system with a filtration system, and you can change their filters every year to get constant airflow.
Energy-Saving Model
Apart from that, you need to check the Seasonal Energy Efficiency Ratio or SEER ratings of an air conditioner before you choose. Air conditioners having high SEER ratings can save your power consumption cost.
Works as a Room Heater
If you want to heating and cooling system for your rooms, then a heat pump. It is known as the reverse cycle air conditioner. These heating and cooling systems can keep your home cool in summer, and you can turn their heating mode during winter. You do not need to install multiple air conditioners and room heaters for your home. A single HVAC system can keep your home at an optimal temperature throughout the year.
Such heating and cooling systems can remove the heat from home by using their refrigerant, and they can provide a constant flow of cool air to your rooms. Similarly, they can pump the heat from outside and provide warmness to your rooms during winter. You can install their ducts on your ceiling or floor.
