An air conditioner was considered as a major icon of luxury a few decades back. But with time, Air conditioners have become a basic necessity for almost all well-to-do households. Technically, the air conditioners are electronic appliances for controlling the temperature by dropping the humidity. The overall functioning of a split air conditioner is very similar to that of a refrigerator. This pulls out the heat from an area using a refrigeration cycle to maintain the environment fresh and cool.
Most of the air conditioners work almost in a similar way irrespective of their size and shape. The most popular amongst the air conditioners available in the market is referred to as a split system air conditioner and are high in demand. In this model of air conditioners, the compressor is installed inside the home whereas the condenser remains outside and they are connected by refrigerant pipes. The noise produced by the split system air conditioners is comparatively very less in comparison to their other competitors. The split air conditioners are wall-mounted and possess a rotary compressor that forces the cold air into the room.
Facts Which You Should Be Aware of the Split System Air Conditioners
The air conditioner’s tonnage specifically determines the actual cooling capacity of the machine. This depends on the overall size or the area of the room which you require to use it in. The split system air conditioners are available in 0.5, 0.75, 1, 1.5- & 2-ton capacities. In case you opt for a lower tonnage AC to reduce your costs, then it troubles you big time with more power consumption and thus it is not favourable for long-term usage.
Here are a few tips which the buyers must be aware of before getting air conditioners for their homes:
Size Matters a Lot – This is easy to get confused regarding the different sizes of the split air conditioners which is dependent on the room’s size. For instance, if the area of the room where you are using the air conditioner is 35 square feet area, then you would ideally require 0.75-ton air conditioner whereas a 2-ton AC will suit well for a room with an area of 250 square feet if you want to cool down a large-sized hall.
Hole in the Wall – To install a split system air conditioner in your room, you might require a hole on your wall. The depth of the hole largely depends on the unit you have chosen to buy. This is 3 inches in diameter.
Tubing – A standard split AC requires an additional component like a Tubing for functioning properly. So, you need to purchase this additionally from the market. This usually acts as a connector between the outdoor and indoor units. The size of the tubing depends on the distance that exists between the outdoor and indoor unit.
Triple Zone and Dual Zone – In case if you have a perception that simply purchasing a split AC will solve all your purposes, then you should seriously think again. This means that the number of air handles required for cooling a room. In case if your house is more like an open area which has multiple rooms, then you would require for go for the air handler and ensure that BTUs are adequate for covering the area of all the rooms.
The bottom line is that you should always avoid cheap split system air conditioners as they consume more electricity and your energy bills would tend to be unmanageable. Hence, this makes a lot of sense to invest in a power-efficient well-known brand of split system air conditioner which will give you good service in the long run.
